Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct
(866) 204.7068

Made in the USA

Mediablaster® Cabinets
By Media Blast®

Power Peen Direct Pressure | Media Blast & Abrasives, Inc.

The Power Peen Direct Pressure sandblasting cabinet is made from 100% welded 12- and 14-gauge CRS. It includes internal abrasive storage and a *patented internal separator reclaimer for use with a variety of abrasives and gun sizes.

The Power Peen is a Direct Pressure Mediablaster® designed as industrial sandblasting equipment for Production capacity applications. This means the Power Peen blast cabinet is able to operate one (1) or more hours daily.

This mediablaster cabinet requires 25 cfm of compressed air, or more, and includes a 1.0 cubic foot ASME coded Pressure Pot complete with pressure pot access port for service. The Pressure Pot is used to pneumatically push the abrasive media through the blast hose. It is the reason a pressure machine can produce faster abrasive velocities than abrasive delivery methods that do not utilize a pressure pot. Media Blast advises a small, raised operator's platform to maintain the proper hopper slope to feed the pot on our Power Peen models. This platform varies in height depending on cabinet size and is listed in the Optional Features. 

Power Peen Direct Pressure Uses

The Power Peen machine is designed to be a grit (shot) blast cabinet. So, it can operate using any abrasive size 120 mesh and larger. The Power Peen is ideal when:

  • using heavy blasting media like steel shot and grit
  • executing through-hole part blasting
  • shot peening
  • requiring high frictional heat for heavy coatings and blind-hole cleaning

The Power Peen Direct Pressure blasting cabinet excels in any of these circumstances. Basically, it excels in applications which require a pressure abrasive delivery sand blasting cabinet.

The capacity to store dust, with ease of service, makes this machine the right choice for production capacity operations. However, for finer abrasive applications, look to the Power Strip direct pressure model with pneumatic conveyor, cyclone separator, and outside pressure pot assembly.

Why Choose Media Blast & Abrasive, Inc.?

When it comes to media blast machines, there's only one name you need to remember - Media Blast & Abrasive, Inc. We take pride in manufacturing the highest quality machines, which is why our customers choose us time and time again. Our Power Peen Direct Pressure machine is a game-changer for industrial cleaning and surface preparation. The results speak for themselves . Basically, it's simply the best machine on the market. Don't just take our word for it, contact us today to learn more about what sets Media Blast & Abrasive, Inc. apart and why we should be your number one choice for media blast machines. Our team is always happy to answer any questions you may have, so give us a call.

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this machine, contact us here.

To learn more, check out the SPOTLIGHT article on our blog.

STANDARD FEATURES:

  • 100% welded 14-gauge CRS cabinet construction
  • Bolt-on machine hopper, replaceable
  • 1.0 cubic foot ASME coded pressure pot assembly with access port
  • Heavy duty abrasive flow-control mixing valve
  • Pressure pot choke control valve for fine control
  • Foot operated blast control valve with treadle pedal
  • Smaller inside ERGO whip hose, replaceable
  • LED outside cabinet lighting on standard top with LED flood inside
  • LED spot lighting on expanded height models
  • Safety ClearView® 13” x 24” view window with window protector assembly
  • Window sweep to help eliminate static dust sticking
  • Tool-Less window replacement
  • Double panel door construction, no spills
  • Lockable refrigerator door handle
  • Safety door interlock
  • Operator dash panel
  • Precision air-regulator, air filter/water trap with gauge
  • 10″ diameter work ports with two-piece glove and gauntlet
  • Expanded metal work grates
  • Hopper flange to pot flange scalper screen
  • Steel front hopper wear plate, replaceable
  • Inside blow-off gun
  • Abrasive separator reclaimer, *patented
  • Machine Lag Pads
  • Production cartridge dust collector with:
    • 700 or 1100 cfm blower standard
    • Pneumatic vibrator cleaning cycle
    • Hopper bottom dust storage
    • 220 to 440 sq.ft. of MERV tested and certified cartridge filter
    • Maintenance access door

*US 7,008,304

AVAILABLE OPTIONS:

Some of the most used options are:

  • Ambient Dryer
  • Automatic Pot Blow-Down Controls
  • Constant Pressure Pot Controls with Manual Override
  • Fixed Turntable
  • Mobile Work Cart and Turntable with Internal Machine Tracks
  • Outside Track Extensions and Door Modification
  • Dual Dust Collector for 440 Sq.Ft. of total filter surface
  • Automatic Timed Reverse Pulse Cleaning Cycle
  • Super Exhaust Blower Silencer
  • HEPA After Filter
  • Super Silencer
  • Additional Side Access Door
  • Mirror Image Cabinet
  • Pot Assist Vibrator Loading
  • Dust collector cycle cleaning gauge
  • Dust collector blower silencer to meet OSHA
  • Operator Work Platform, cabinet size related
  • Heavy Duty Bar Work Grates
  • 3/16″ boron carbide blast nozzle, optional larger 1/4″ also available, Tungsten std.

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Model Name:

Power Peen

Machine Type:

Direct Pressure with internal abrasive storage

Abrasive Delivery:

Dry, direct pressure

Air Specs:

25-90 cfm

Compressed Air Usage:

25 to 90 cfm at 80 psi

Suggested Air Compressor:

The standard nozzle size for the Power Peen is 3/16″ ID using 31 cfm at 60 psi. Smaller and larger nozzle sizes are available for applications with smaller and larger air compressors. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

0-150 mesh

Additional Abrasive Info:

Operates with all abrasive types

Most Used Abrasive Type:

Steel Shot, Steel Grit, Glass Beads, Aluminum Oxide, Silicon Carbide, Plastic and more

Dust Collector:

700 & 1100 cfm – 220 & 440 sq.ft. cartridge filters – hopper bottom dust storage – patented internal separator reclaimer – dust collector service access door

Key Features:

6 six standard production cabinet sizes – internal patented separator reclaimer – 120 volt and high voltage electrical – abrasive mixing valve – LED cabinet lighting – all air controls – tungsten carbide nozzle – safety glass window with protector – window air sweep – safety door interlock – expanded grates – blow-off gun and more – many options available for part handling, turntables and mobile carts

WARNING:
Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.
3030
Request Info
30" x 30" x 30"H
Door 24" x 25"H
34" x 45" x 84"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
120V/60Hz/1Ph Wood crate
774 lbs
3636 Std. Top 40-degree
Request Info
36" x 36" x 30"H
Door 30" x 25"H
44" x 51" x 84"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
120V/60Hz/1Ph Wood crate
925 lbs
3636 Exp. Top 17-degree
Request Info
36" x 36" x 36"H
Door 27" x 28"H
44" x 51" x 90"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
120V/60Hz/1Ph Wood crate
925 lbs
4836 Std. Top 40-degree
Request Info
48" x 36" x 36"H
Door 30" x 25"H
52" x 68" x 84"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
120V/60Hz/1Ph Wood crate
1300 lbs
4836 Exp. Top 17-degree
Request Info
48" x 36" x 36"H
Door 27" x 28"H
52" x 51" x 90"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
120V/60Hz/1Ph Wood crate
1300 lbs
4848 Exp. Top 17-degree
Request Info
48" x 48" x 36"H
Door 39" x 28"H
52" x 65" x 90"H 440 sq.ft. 2- cartridge
1100 cfm blower C-III
Internal Separator
208/230/460/60Hz
Single power source
Wood crate
1560 lbs
6060 1 Station
Request Info
60" x 60" x 48"H
2 Doors 51" x 40"H
65" x 75" x 102"H 440 sq.ft. 2- cartridge
1100 cfm blower C-III
Internal Separator
208/230/460/60Hz
Single power source
Wood crate
1750 lbs
MODEL
WORK AREA /
DOOR OPENING

30" x 30" x 30"H
Door 24" x 25"H

OVERALL
DIMENSIONS

34" x 45" x 84"H

DUST COLLECTOR
SPECIFICATIONS

220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
774 lbs

MODEL
3636 Std. Top 40-degree
Request Info
WORK AREA /
DOOR OPENING

36" x 36" x 30"H
Door 30" x 25"H

OVERALL
DIMENSIONS

44" x 51" x 84"H

DUST COLLECTOR
SPECIFICATIONS

220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
925 lbs

MODEL
3636 Exp. Top 17-degree
Request Info
WORK AREA /
DOOR OPENING

36" x 36" x 36"H
Door 27" x 28"H

OVERALL
DIMENSIONS

44" x 51" x 90"H

DUST COLLECTOR
SPECIFICATIONS

220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
925 lbs

MODEL
4836 Std. Top 40-degree
Request Info
WORK AREA /
DOOR OPENING

48" x 36" x 36"H
Door 30" x 25"H

OVERALL
DIMENSIONS

52" x 68" x 84"H

DUST COLLECTOR
SPECIFICATIONS

220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
1300 lbs

MODEL
4836 Exp. Top 17-degree
Request Info
WORK AREA /
DOOR OPENING

48" x 36" x 36"H
Door 27" x 28"H

OVERALL
DIMENSIONS

52" x 51" x 90"H

DUST COLLECTOR
SPECIFICATIONS

220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
1300 lbs

MODEL
4848 Exp. Top 17-degree
Request Info
WORK AREA /
DOOR OPENING

48" x 48" x 36"H
Door 39" x 28"H

OVERALL
DIMENSIONS

52" x 65" x 90"H

DUST COLLECTOR
SPECIFICATIONS

440 sq.ft. 2- cartridge
1100 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

208/230/460/60Hz
Single power source

ESTIMATED
SHIPPING WT.

Wood crate
1560 lbs

MODEL
6060 1 Station
Request Info
WORK AREA /
DOOR OPENING

60" x 60" x 48"H
2 Doors 51" x 40"H

OVERALL
DIMENSIONS

65" x 75" x 102"H

DUST COLLECTOR
SPECIFICATIONS

440 sq.ft. 2- cartridge
1100 cfm blower C-III
Internal Separator

STANDARD
ELECTRICAL

208/230/460/60Hz
Single power source

ESTIMATED
SHIPPING WT.

Wood crate
1750 lbs