Call Factory Direct: 866.204.7068

N-200 GF Siphon

N-200 Gravity Feed Siphon sand blasting cabinet
The N-200 GF Siphon is made of 100% welded 12- and 14-gauge CRS and features a pneumatic abrasive conveyor and overhead abrasive storage which are ideal for fine and ultra-fine abrasive when maximum abrasive density is critical.

The N-200 Gravity Feed Siphon sand blasting cabinet uses a pneumatic conveyor and high efficiency cyclone separator to lift and store the abrasive above the operator work grate. This allows the highest percentage of abrasive (measured in pounds per minute) to be delivered to any part being processed using siphon delivery. Additionally, the abrasive hose is shorter than any other siphon machine allowing the most efficient possible injector gun performance.

The Gravity Feed design comes from a military specification that required the abrasive to be stored above the part to eliminate the effects of gravity when delivering abrasive using an injector operated gun assembly. This design reduces the machine footprint and creates the most compact production blast machine, ideal for situations when space is critical.

The N-200 GF sand blasting cabinet is available in many special cabinet sizes but standard in two sizes, the 3636 and 4848 sizes commonly used with turntable assemblies because of their square cabinet dimensions. This sandblasting equipment can operate with almost any abrasive type and size, but it's the only machine designed to use fine and ultra-fine abrasives.

All N-200 GF include the most advanced cartridge filtration dust collector running negative pressure with 100% welded construction. All include maintenance access door on the dust collector, blower silencer, and pneumatic filter cleaning cycle with hopper bottom dust storage for easy dust removal. Look at the HEPA after filter in available options for machine cell operation.

youtube logo small



  • 100% welded 12- and 14-gauge CRS cabinet construction
  • Bolt-on machine hopper, replaceable
  • Adjustable abrasive flow-control mixing valve, replaceable
  • Foot operated blast control valve with treadle pedal
  • 3-Y blast gun with 3/8” tungsten carbide nozzle standard
  • Long wear hose
  • LED spot lighting standard
  • Safety glass view window, oversized
  • Glass window protector, low static
  • Double panel door construction, no spills
  • Lockable refrigerator door handle
  • Safety door interlock
  • Precision air-regulator, air filter/water trap with gauge
  • 10” diameter work ports with two-piece glove and gauntlet
  • Expanded metal work grates, 3/4" - #9 flattened
  • Bolt-in cabinet hopper scalper screen
  • 3/4 hp 1100 cfm class III pressure blower  & single power source
  • Replaceable abrasive mixing valve
  • Blow-off gun
  • Cycle cleaning gauge for dust collector
  • Dual cartridge-440 sq.ft. dust collector
  • Hopper dust storage, 3.5 cubic foot storage
  • 1100 cfm blower
  • Pneumatic abrasive conveyor and overhead abrasive storage hopper
  • High efficiency cyclone separator reclaimer
  • Cyclone efficiency tuning valve
  • Catalyst paint


Click here to see the long list of time saving and maintenance saving features available on most Media Blast Production Models.

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Technical Information: N-200 GF PRODUCTION SIPHON
Machine Type: Dry Siphon Gravity Feed
Compressed Air Usage: 25 to 90 cfm at 80 psi
Suggested Air Compressor:

The standard gun size for the N-200 GF is 3/8" using 46 cfm at 80 psi. Smaller and larger gun sizes are available for applications with larger and smaller air compressors. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size: 180 to 320 mesh recommended
Most Used Abrasive Type: Glass Beads, Aluminum Oxide, Silicon Carbide, Plastic and more
WARNING: Abrasive Restrictions and Warning
Paint Specification: Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
Exp. Top 17-degree

Request Info
36" x 36" x 36"H
Door 27" x 28"H
44" x 51" x 98"H 440 sq.ft. 2- cartridge
1100 cfm blower C-III
Pneumatic Conveyor
Single power source
Wood crate
1075 lbs
Exp. Top 17-degree

Request Info
48" x 48" x 36"H
Door 39" x 28"H
52" x 65" x 98"H 440 sq.ft. 2- cartridge
1100 cfm blower C-III
Pneumatic Conveyor
Single power source
Wood crate
1100 lbs