Call Factory Direct: 866.204.7068

CrystalBlast® Artist Station

Crystal Blast Artist Station
Among the innovative features of this model, note the availability of front and side access doors, slit rubber curtain over brushed work port, included pneumatic pot assist abrasive loading circuit included and angled view window.

The CrystalBlast® 4828 Artist Station is a new approach to an old machine design which incorporates many new exciting machine features never before seen in the market.

This machine is designed for sandcarving larger panels, allowing the operator to work the entire part surface using the front brushed operator work port and full width window. Additionally, the unit includes the unique slit rubber curtain that seals against the brushes while allowing the operator to move from one side to the other. Front and side access door combinations can be ordered, eliminating the single front access door, and non-metallic composition bar grates are used to protect parts.

The patented abrasive separator reclaimer is 99.9% effective on 50 micron abrasive and the included pneumatic pot loading circuit helps with fine abrasive re-load back into the pressure pot.

This model is available with optional True negative pressure HEPA after filter with magnahelic monitor gauge for increased collector efficiency.

youtube logo small

Print

STANDARD FEATURES:

  • 100% welded cabinet construction 12- and 14-gauge steel construction
  • Front access door and available optional side access door
  • Brushed work ports with slit-rubber sealing curtain
  • Padded armrest
  • Movable floor foot pedal, guarded pedal is available
  • ASME coded 50 lbs. capacity pressure pot w/ maintenance cleanout port
  • Hopper vibrator circuit for ultra-fine abrasive pot loading assist
  • Quick-disconnect nozzle, 3/32" boron carbide, upgrade to 1/8"
  • Blow-off gun
  • Patented "bolt-on" abrasive separator reclaimer down to 240 mesh
  • Dustless work area
  • Dust collector blower silencer
  • LED cabinet lighting
  • Composition bar work grates, non-metallic
  • Tool less hoses, blast nozzle and window replacement
  • ClearView window with protector glass and  window sweep
  • One 3-way valve pressurization/depressurization for quick pot loading
  • Industrial grade abrasive on-off pinch valve (high pressure/long wear)
  • Safety door interlock switch
  • Cabinet casters with brakes
  • Rear mounted dust collector with:
    • 220 sq.ft. certified cartridge filter
    • Filter cleaning pneumatic vibrator (s) circuit
    • Hopper bottom dust storage
    • 700 cfm class III blower with silencer
    • 240 mesh patented separator reclaimer
  • Flexible pot valve with spring loaded closed  assembly for low pressure on-off cycle with constant pot pressure
  • Air regulator/filter and gauge
  • Front operator padded armrest
  • Micro abrasive hose
  • Quick change nozzle using no tools

AVAILABLE OPTIONS:

  • Additional right side access door
  • Upgrade to dual cartridge 440 sq.ft. certified cartridge area
  • HEPA after-filter with certified filter
  • High voltage single power source upgrade with 1100 cfm blower
  • Automatic timed cleaning cycle, pneumatic vibrator cycle
  • 1/8" Boron carbide blast nozzle upgrade
  • Inline ambient air dryer
  • Static discharge kit

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Technical Information: ARTIST STATION by CrystalBlast®
Machine Type: Direct Pressure Sandcarver for panel carving
Compressed Air Usage: 5.7 cfm @ 30 psi with standard 3/32" nozzle ID or 8.4 cfm @ 30 psi with 1/8" nozzle ID
Suggested Air Compressor:

We recommend a 220-volt single-phase electrical power supply for the compressor with the standard 3/32" nozzle ID. Ask for details when using 1/8" nozzle ID. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size: 80 to 240 mesh
Most Used Abrasive Type: Aluminum Oxide & Silicon Carbide
WARNING: Abrasive Restrictions and Warning
Paint Specification: Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.
Artist Station
Request Info
48" x 28D" x 36"H
Door 42" x 30"H
50W" x 52" x 90"H
Blower crown removable
220 sq.ft. cartridge
1/2 hp 700 cfm blower
Hopper dust storage
Pneumatic vibrator
240 mesh separator
Blower silencer
440 sq.ft. DC option
120V/60Hz/1Ph
High voltage single power option
Wood Crate
756 pounds