Automotive Blasters

The Automotive Industry uses a combination of almost all blast cabinet categories. Through the years we found home shops, commercial repair and industrial production all using siphon and direct pressure models. This category shows the smallest to the largest units used for cleaning, stripping and shot peening, grouped together for easy evaluation with many different cabinet sizes available. All models include our Patented Abrasive Separator Reclaimer used to remove the dust and spent abrasive to maintain the best possible cabinet visibility. Check out our blog article, Automotive Blast Cabinets, for an overview of the ten automotive machines we offer.

Hobby Blast

The Hobby Blast is a small, light duty, siphon, and top-loading media blasting cabinet that requires 12 cfm of compressed air. To save on floor space, the unit allows for bench top or wall mounting. This machine is manufactured specifically for small cleaning applications such as hand-held tools or auto parts. Equipped with many standard features, which are listed below in detail, this 100% welded-steel, leak-proof blasting cabinet is designed to outperform garage-unit blast cabinets made ...
View Details
Features
- 100% welded cabinet construction
- Adjustable flow-control abrasive mixing valve
- Foot operated blast control valve
- Small Y blast gun with tungsten carbide nozzle
- LED lighting
Space Saver HD

A light duty, top-loading, siphon media blast cabinet with a small machine footprint, the Space Saver HD requires 16 cfm of compressed air. This sand blast cabinet was designed for home garage use, small equipment repair shops and environments that cannot accommodate side loading access doors. Among the standard features, the Space Saver HD comes with a Class III 335 cfm pressure dust collector blower and centrifugal abrasive separator reclaimer to remove dust and spent abrasive from the ...
View Details
Features
- 100% welded 14-gauge CRS cabinet construction
- Adjustable abrasive flow-control mixing valve
- Foot operated blast control valve
- Small 2-Y blast gun with tungsten carbide nozzle
- LED cabinet lighting
Viper HD

The light duty, siphon Viper HD is the widest cabinet manufactured using a single 48" steel width and 100% welded construction. This light duty model requires 16 cfm of compressed air and is very simple to operate and economical to own. Among its many standard features, the Viper HD has two (2) side access doors, to accommodate over-sized parts, and moves the lighting to the outside of the cabinet which permits more usable vertical space inside cabinet. This model also includes a Class III ...
View Details
Features
- 100% welded 14-gauge CRS cabinet construction
- Adjustable abrasive flow-control mixing valve
- Foot operated blast control valve
- Small usable 2-Y blast gun with tungsten carbide nozzle
- LED cabinet lighting in an outside light housing
Cobra

The light duty, siphon Cobra model requires 20 cfm of compressed air and has more features than either the Viper HD or the Space Saver HD. This negative pressure, 100% welded steel cabinet comes standard with two side access doors, hopper dust storage, and uses cartridge filter technology. It was designed for general repair shops, facility in-house maintenance and automotive repair. Due to the advanced cartridge filter technology, the Cobra is the best of the blast cabinets in its class. ...
View Details
Features
- 100% welded 14-gauge CRS cabinet construction
- Adjustable abrasive flow-control mixing valve, replaceable
- Foot operated blast control valve
- 3-Y blast gun with tungsten carbide nozzle & long wear hose
- LED cabinet lighting
Shop Standard

The Shop Standard is a dry, siphon, RD blast cabinet made from 100% welded 12- and 14-gauge cold rolled steel. It's available in 4 standard sizes to accommodate a variety of applications and operates with a 5/16" 25 cfm gun size for faster part processing when daily operation is not needed or required. The Shop Standard blast cabinet uses a cabinet design from the more costly Industrial Production line of machinery with a smaller, non-production dust collector to reduce cost. Should your ...
View Details
Features
- 100% welded 12- and 14-gauge CRS cabinet construction
- Bolt-on machine hopper, replaceable
- Adjustable abrasive flow-control mixing valve, replaceable
- Foot operated blast control valve with treadle pedal
- 3-Y blast gun with 5/16” tungsten carbide nozzle
Dominator Siphon

The Dominator Siphon Machine is designed for Production operation; we consider production operation to be one (1) hour or more of daily machine operation using a production gun size consuming about 45 cfm of compressed air. The negative pressure dust collector on this machine uses the most advanced cartridge filtration and effortless pneumatic cleaning cycle assembly available to ensure longer duty cycle, a cleaner work area and longer blower service life. The replaceable cartridge style ...
View Details
Features
- 100% welded 12- and 14-gauge CRS cabinet construction
- Bolt-on machine hopper, replaceable
- Adjustable abrasive flow-control mixing valve, replaceable
- Foot operated blast control valve with treadle pedal
- 3-Y blast gun with 3/8" tungsten carbide nozzle standard
3030 Savage Direct Pressure

The 3030 Savage Direct Pressure operates on a smaller air compressors using 220-volt single-phase electrical power. This is the electrical power found in home garages and commercial boulevard facilities. The 3030 Savage has the correct abrasive flow controls for the smaller air volumes. The 3030 Savage is also a constant pressure design that holds the pot pressure until you decide it's time to fill the pot assembly. This results in instant on-off control of the blasting cycle that is often ...
View Details
Features
- 100% welded 12- & 14-gauge CRS cabinet construction
- Bolt-on machine hopper, replaceable
- Adjustable abrasive flow-control, using compressed air eliminates wear
- Foot operated blast control valve with treadle pedal
- High pressure long wear on-off control valve for constant pot pressure
Charger Direct Pressure

The Charger Direct Pressure Machine is designed for Production operation; we consider production operation to be one (1) hour or more of daily machine operation using a production gun size consuming about 45 cfm of compressed air. The negative pressure dust collector on this machine uses the most advanced cartridge filtration and effortless pneumatic cleaning cycle assembly. This design ensures a longer duty cycle, cleaner work area and longer blower service life. The replaceable cartridge ...
View Details
Features
- 100% welded 12- and 14-gauge CRS cabinet construction
- Operator platform supplied with all Chargers
- Bolt-on machine hopper, replaceable
- Adjustable abrasive flow-control mixing valve, replaceable
- Foot operated blast control valve with treadle pedal
Blizzard

The Blizzard Soda Blast Machine is Production machine designed specifically for operation with bicarbonate (baking Soda) and wheat starch abrasives using 12 to 40 cfm of compressed air. Baking Soda abrasives typically don't alter the surface of the substrate being cleaned and they also have the unique ability to remove oil and grease contaminations from the parts. Dust collector maintenance and cabinet visibility are two complaints that often occur when using soda. The Blizzard machine ...
View Details
Features
- 100% welded 12- and 14-gauge CRS cabinet construction
- Catalyst Paint
- Double Panel Door Construction, no spills
- Lockable Door Latch
- LED spot lighting on expanded height & square top models
Hailstorm

The Hailstorm Direct Pressure sandblast cabinet is a Production machine specifically designed for operation using plastic abrasive. Production machines should be considered for applications requiring one (1) hour or more of daily machine operation. Plastic abrasive typically does not alter the surface of the substrate being processed. This is beneficial when processing parts or removing paints or powder coatings that have a chemical pretreatment underneath the topcoat. The Hailstorm ...
View Details
Features
- 100% welded 12- and 14-gauge CRS cabinet construction
- Bolt-on machine hopper, replaceable
- 1.7 cubic foot ASME coded pressure pot assembly with access port
- Pot Blow-Down controls
- Magnetic Separator