Call Factory Direct: 866.204.7068

3030 Savage Direct Pressure

3030 Savage Direct Pressure
This model comes equipped with a 700 cfm exhaust blower and separator reclaimer with 220 sq.ft. filter cartridge, and 100% welded dust collector housing. Standard features also include the pneumatic vibrator cleaning cycle, hopper dust storage and dust collector blower silencer for clean operation in small locations.

The 3030 Savage Direct Pressure operates on a smaller air compressors using 220-volt single-phase electrical power. This is the electrical power found in home garages and commercial boulevard facilities. The 3030 Savage has the correct abrasive flow controls for the smaller air volumes.

The 3030 Savage is also a constant pressure design that holds the pot pressure until you decide it's time to fill the pot assembly. This results in instant on-off control of the blasting cycle that is often not included with direct pressure models.

When using cutting and stripping abrasive like aluminum oxide the 3030 Savage uses a 1/8" ID nozzle and requires 18-19 cfm to maintain 80-90 psi. Maximum impact velocity for glass beads using direct pressure is 40 psi and the nozzle size for the 3030 Savage would then be 3/16" using 23 cfm at the maximum impact velocity of 40 psi. The 3030 Savage is available with either nozzle size standard and they both operate in home shops; order both sizes when changing abrasive types.

To learn more, check out the 3030 SAVAGE DIRECT PRESSURE CABINET SPOTLIGHT article on our blog.

youtube logo small

Print

STANDARD FEATURES:

  • 100% welded 12- & 14-gauge CRS cabinet construction
  • Bolt-on machine hopper, replaceable
  • Adjustable abrasive flow-control, using compressed air eliminates wear
  • Foot operated blast control valve with treadle pedal
  • High pressure long wear on-off control valve for constant pot pressure
  • 1/8" or 3/16"  tungsten carbide nozzle standard
  • Long wear flexible abrasive hose
  • LED cabinet lighting
  • Safety glass view window with positive sealing window seal
  • Glass window protector, low static
  • Double panel door construction, no spills
  • Lockable refrigerator door handle
  • Precision air-regulator, air filter/water trap with gauge
  • 10" diameter work ports with 2 piece glove and gauntlet
  • Bar work grates, 150 lbs. per sq.ft.
  • Bolt-in cabinet hopper scalper screen
  • 1/2 hp 700 cfm class III pressure blower 550 cfm running
  • Separator reclaimer, pneumatic centrifuge (Patented) internal
  • 220 sq.ft. certified cartridge filter w/ pneumatic cleaning std.
  • Hopper dust storage and maintenance access service door
  • Catalyst paint
  • 0.5 cubic foot ASME coded pressure pot with access service port
  • Constant pot pressure using high-pressure low wear industrial pinch valve
  • Replaceable front hopper wear plate, steel
  • Choke valve for fine tuning abrasive flow
  • Blow-off gun
  • Patented internal separator reclaimer for 0-150 mesh abrasive

AVAILABLE OPTIONS:

  • Ambient air dryer
  • Safety door interlock
  • Perforated bar grate overlay
  • Anti-Static grounding kit

Click here to see the long list of time saving and maintenance saving features available on most Media Blast Models

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Technical Information: 3030 SAVAGE
Machine Type: Dry Direct Pressure
Compressed Air Usage: 17-18 cfm @ 80 psi up to 23 cfm
Suggested Air Compressor: Standard nozzle size only requires a 220-volt single-phase air compressor; however, many small piston type air compressors will operate this model, ask for details. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.
Recommended Abrasive Size: 60 to 150 mesh
Most Used Abrasive Type: Glass Beads, Aluminum Oxide, Silicon Carbide and Plastic. Please be aware that direct pressure must operate at much lower pressures than siphon pressure, most abrasives will exceed maximum impact velocity at 40 to 50 psi when using direct pressure.
WARNING: Abrasive Restrictions and Warning
Paint Specification: Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.
3030
Request Info
30" x 30" x 30"H
Door 24" x 25"H
35" x 45" x 84"H 220 sq.ft. cartridge
700 cfm blower C-III
Internal Separator
Pneumatic cleaning
120V/60Hz/1Ph Wood crate
650 lbs