Air Requirements:
3/32” i.d. Nozzle (std.): 6.8 cfm @ 40 psi
1/16” i.d. Nozzle: 3.1 cfm @ 40 psi
1/8” i.d. Nozzle: 12 cfm @ 40 psi

Electrical: 120V – 20 amp Service

Door Opening (without cutout): 18” x 17.25”h

Noise Level: 73 decibels

12 & 14 Gauge Steel Construction
Two Component Urethane Paint

Operator Workstation with:

Laminated Safety Glass () View Window
Sacrificial Window Protector Glass ()
6” Diameter Workports
Long Life Gauntlet Sleeves
Disposable Latex Gloves (box of 100)
Foot Operated Blast Valve ()
40 Watts Dust Tight Fluorescent Lighting
Air Blow-off Gun
Stand up or Sit-down Configuration
No Spill Blast Enclosure Door
Safety Door Interlock ()
Heavy Duty Appliance Style Door Latch

Abrasive Delivery System:

Integrated Stainless Steel Abrasive Sifting Screen
Blast Pot () Attached to Blast Cabinet
40 Pound Capacity Blast Pot (ASME certified)
EZ™ Fill Assembly on Blast Pot
Abrasive Metering Valve ()
UltraWear™ Blast Control Valve
Dual Air Control Valve
Flexible, Long Life Blast Hose
3/32” i.d. Tungsten Carbide Blast Nozzle
ComfortGrip™ Nozzle Holder
Foot Operated Blast Valve ()
Blast at Pressures as Low as 2-3 psi

Dust Collector:

Centrifugal Abrasive Reclaim Separator ()
550 cfm Exhaust Blower ()
Exhaust Blower Silencer ()
Cartridge Filter () - 110 sq. ft. Filter Area
Filter Efficiency – 99.95% to 0.5 Micron ()
Quick Change Filter Mount
Button Activated Manual Reverse Pulse () Filter
Clean
Dust Storage Hopper () with Discharge Cap