MODEL: N-200 POWER STRIP Direct Pressure
(Production Cabinet)

The N-200 Power Strip direct pressure () machine incorporates a 1.7 cubic foot pressure pot () and a cyclone separator reclaimer () located outside the blasting chamber. This machine uses the pneumatic conveyor () and cyclone to permit operation with fine and ultra-fine abrasive () media. Fine abrasive will often cause visibility problems, mixing valve feed problems or high abrasive usage rates. Removing the abrasive from the cabinet and storing it outside creates the best possible cabinet visibility and also helps dry and fluff the abrasive, yielding a more uniform abrasive flow to the nozzle. As a result of the efficiency of the Cyclone the abrasive consumption of this unit is truly the lowest possible. Reducing moisture, increasing visibility and reducing abrasive usage are all important benefits created by using a Cyclone equipped machine.

The pressure pot assembly () is used to pneumatically push the abrasive media producing faster abrasive velocities than the typical siphon blast () machine.

Operation with finer blasting media, 150-325 mesh, through hole part blasting, high abrasive frictional () heat and blind-hole cleaning are all advantages when using the N-200 Power Strip direct pressure () type of blasting cabinet.

INCLUDED STANDARD FEATURES

2 & 14 Gauge CRS Construction
100% Welded () Construction
1.7 Cubic Foot Pressure Vessel
Catalyst Paint
Double Panel Door Construction, no spill
Lockable Door Latch
Heavy Duty Abrasive Mixing Valve ()
Foot Operated Blast Valve ()
Air Regulator-Filter-Water Trap
380 Watts Lighting
Safety Plate Glass View Window ()
Window Protect Assembly ()
Safety Door Interlock ()
10” Diameter Work Ports
Heavy Duty Bar Grate Work Surface ()
Bolt-In Hopper Abrasive Scalper Screen
Steel Hopper Wear Plate
Bolt-On Machine Hopper, replaceable ()
1/4” Boron Carbide () Blast Nozzle, standard
Blow-Off Gun
Cyclone Separator Reclaimer () with pneumatic
conveyor
Production Dust Collector:
- 770 CFM
- 220 Sq. Ft. Filter Cartridge ()
- Hopper Bottom Dust Collector ()
- Easy Access Door
- Filter Cycle Cleaning Gauge ()
Pneumatic Filter Cleaning System

N-200 Power Strip 4836 with Expanded Height Top
(also available with standard 45 degree top, see N-200 photo)

The N-200 Power Strip Cabinet is also available with standard 45 degree top for general part cleaning, or the expanded top reduced window slope for taller parts that require additional inside cabinet height.

Other Available Options:

Boron Carbide () Nozzle Substitution
Pressure Pot Blow-Down Controls ()
(available for 1.7 pot)
Constant Pressure Switch
(available for 1.7 pressure pot)
2.8 Cubic Foot Dual Chamber Continuous Feed
Pressure Pot ()
3.5 Cubic Foot Pressure Pot (includes blow-down
controls () and constant pressure sw.)
Maintenance Meter ()
Magnahelic Gauge (), non-electrical
Cutting Abrasive Package ()
Turntable, Manual or Powered ()
Mobile Work Cart Assembly & Track Extension ()
Gun Holding Fixture ()
White Polyethylene Cabinet Wear Plates
Steel Hopper Wear Plate, front hopper location
Expanded Cabinet Heights ()
Integrated Vaccuum Cleanup System ()
Shrouded Foot Pedal ()
2 HP, 1160 cfm Exhaust Blower ()
(single power electrical)
5 HP, 2000 cfm Exhaust Blower ()
(single power electrical)
2 or 4 Cartridge Expanded Dust Collector
Reverse Pulse Cleaning (), manual pulse only single
cartridge
Reverse Pulse Timed Cleaning, (minimum 2 cartridge
required)
Contained Dust Discharge Assembly ()
Polyester Filter () Cartridge Upgrade
Exhaust Blower Silencer ()
HEPA Filtration Package ()
Static Electricity Grounding Kit ()
Special Machine Color, color chip matched
Powder coat Machine
Semi-automated Assemblies

NOTE: The above features are included on every N-200 Power Strip Blast Cabinet. Additional Optional Features listed are available at additional cost. Any Option listed in Underlined Blue Italic is available as bolt-on and can be added to house inventory prior to machine shipment. Other options listed are available but require custom machine work order and may increase machine delivery time. When viewing Machine Specifications, models noted with Underlined Blue Italic are shipped from house inventory. House inventory includes crated shipping weight under model number…All machines shipped Freight collect unless prior arrangements have been made.