MODEL: N-200 POWER PEEN Direct Pressure (Production Cabinet)

The N-200 Power Peen unit incorporates a 1.0 cubic foot pressure pot () attached to the bottom of the blast cabinet hopper. The Power Peen is designed for operation with any abrasive size larger than 120 mesh. This also includes glass beads and all plastic abrasives. Heavy blasting media, steel shot, steel grit and large cutting abrasives are also used in the Power Peen machine. The pressure pot is used to pneumatically push the abrasive media producing faster abrasive velocities than the typical siphon blast () machine.

Operation with heavier blasting media, through hole part blasting, high abrasive frictional heat () and blind-hole cleaning are all advantages when using the Direct Pressure () type of blasting cabinet.

The Power Peen machine maintains the proper pot hopper slope using a raised operators platform included will all Power Peen models.

The Power Peen is a simple to operate direct pressure machine for production applications. Production operation is best defined by…operation of a blast cabinet daily for 1 hour or more.

In addition even larger dust collectors are available to allow even longer operation.

INCLUDED STANDARD FEATURES

12 & 14 Gauge CRS Construction
100% Welded ()Construction
Catalyst Paint
1.0 Cubic Foot Pressure Vessel ()
Double Panel Door Construction, no spill
Lockable Door Latch
Heavy Duty Abrasive Mixing Valve ()
Foot Operated Blast Valve ()
Air Regulator-Filter-Water Trap
380 Watts Lighting
Safety Plate Glass View Window ()
Window Protect Assembly
Safety Door Interlock ()
10” Diameter Work Ports
Heavy Duty Bar Grate Work Surface ()
Bolt-In Hopper Abrasive Scalper Screen
Steel Hopper Wear Plate
Bolt-On Machine Hopper, replaceable ()
1/4” Boron Carbide () Blast Nozzle, standard
Blow-Off Gun
Abrasive Separator Reclaimer ()
Production Dust Collector:
- 770 CFM
- 220 Sq. Ft. Filter Cartridge ()
- Hopper Bottom Dust Collector ()
- Easy Access Door
- Filter Cycle Cleaning Gauge ()
- Pneumatic Filter Cleaning System

N-200 Power Peen 4848 with Expanded Height Top and Raised Operator Platform ()

(Also available with standard 45-degree top, see N-200 Photo)

The N-200 Power Peen Direct Pressure Blast Cabinet is available with standard 45 degree top for general part cleaning or the expanded top reduced window slope for tall parts that require additional inside cabinet height.

Other Available Options:

Boron Carbide () Nozzle Substitution
Pressure Pot Blow-Down Controls ()
Maintenance Meter ()
Magnahelic Gauge (), non-electrical
Cutting Abrasive Package ()
Turntable, Manual or Powered ()
Mobile Work Cart Assembly & Track Extension ()
Gun Holding Fixture ()
White Polyethylene Cabinet Wear Plates
Steel Hopper Wear Plate, front hopper location
Expanded Cabinet Heights ()
Integrated Vacuum Cleanup System ()
Shrouded Foot Pedal ()
2 HP, 1160 cfm Exhaust Blower ()
(single power electrical)
5 HP, 2000 cfm Exhaust Blower ()
(single power electrical)
2 or 4 Cartridge Expanded Dust Collector
Reverse Pulse Cleaning (), manual pulse only single
cartridge
Contained Dust Discharge Assembly ()
Polyester Filter () Cartridge Upgrade
Blower Exhaust Silencer ()
HEPA Filtration Package ()
Timed Cartridge Filter Cleaning System
Static Electricity Grounding Kit ()
Special Machine Color, color chip matched
Powder coat Machine
Semi-automated Assemblies

Power Peen Literature: Page 1 | Page 2