Abrasive Reclaimers are used to recycle and clean the abrasive during machine operation. Worn abrasive and dust are sent to the dust collector for disposal, usable abrasive is recycled into the machine storage hopper for re-use.

Internal reclaimers are most effective on 150-mesh abrasive and larger.

All MBA Internal Reclaimers are bolt on and replaceable in minutes.

External Abrasive Reclaimers (aka cyclone separators) are used when the abrasive is fine, 150 mesh and finer. The ability to contain the abrasive is unique to this type of high efficiency separator. This type of separator can also be used to pneumatically convey larger abrasive when attached to larger cabinets.

External separators help dry the abrasive and introduce air into the abrasive mix for proper abrasive flow to the gun.

External Reclaimers are also used when specialty abrasive is needed, plastic or soda. Using this type of separator will produce the smallest abrasive usage in pounds per hour.