Siphon Micro Machines use an injector siphon gun for the abrasive delivery.  Micro models need smaller abrasive flow controls but not smaller machine features.  The PrecisionEtch model includes a negative-pressure Production Dust Collector, Abrasive Separator Reclaimer and other IMPORTANT features for a neat –clean-quiet work area.  Available in two sit-down ergonomic models and many larger stand-up sizes.

Choose the PrecisionEtch for small controlled abrasive blasting  without Out-Of-Control Dust!

Direct Pressure machines use a pressure vessel to pneumatically push the blast media through a single abrasive hose and out the blast nozzle.
This delivery system concentrates the abrasive and creates greater frictional heat. Because the direct pressure system pneumatically pushes the blast media it is possible to blast into blind holes or deep cavities pockets.

All direct pressure machines double the particle velocity at any blasting pressure while greatly concentrating the abrasive pattern.  Processing with the direct pressure system requires lowering the blasting pressure by 50% to prevent exceeding most abrasive impact velocities.

Because of the concentrated pattern and low compressed air volume it is possible to very small parts or part areas.

PrecisionBlast model includes a Production Dust Collector, Abrasive Separator Reclaimer and other IMPORTANT features for a neat –clean-quiet work area.  Available in two sit-down ergonomic models and many larger stand-up sizes.

Choose the PrecisionBlast for small controlled abrasive blasting without Out-Of-Control Dust!

Existing Delivery permits purchase of the cabinet, dust collector, lights and all the items required for neat clean Micro operation using an already existing abrasive delivery systems. Clean up that mess and use a MicroBlast machine by Media Blast.

The MicroBlast cabinet includes all the standard features included with the PrecisionEtch or PrecisonBlast machine except the abrasive delivery system. The dust collector and separator reclaimer keep the abrasive clean and inside the cabinet where you use the hopper slide gate to discharge the collected abrasive back into the pot or hopper for reuse. An ideal machine for pencil blast generators because this unit supplies all other needed items and recycles the abrasive too.

Media Blast supplies the machine ... you supply the delivery method, pot ... siphon ... pencil.